Do Not Show Plot Events - Beckman Coulter Navios Instructions For Use Manual

Using Navios Software
Flowpage Menu
2
Specify the desired drive and folder by selecting them in the list boxes or by typing the path in
the File text box.
3
File name
In the
4
FlowPAGE gives the default file extension *.PGE. The *.PGE extension is only a suggestion, any
standard DOS characters can be used for the full file name.
NOTE
Keep the extension consistent for easy file searches.

Do Not Show Plot Events

Toggles the FlowPAGE 'Hide Events' mode. When in 'Hide Events' mode, all dot, density, histogram
and prism plots displayed on FlowPAGEs will not display event information. Other plot information
(labels, axes, regions and prism dividers) will continue to display and will be updated appropriately
when changes are made to the protocol. Other FlowPAGE components will not be affected by the
enable/disable state of 'Hide Events' mode.
NOTE
Events are not displayed on the flowpage plots when this option is selected however; the flowpage
printouts and PDF files display the corresponding events and data.
10-156
text box, type the desired File Name.
773232AH