JBL On Air Wireless Owner's Manual page 14

• wi-fi protected setup
™
compatible, select this option to set up and configure the JBL On Air
Wireless to work with your network automatically.
• add network: Select this option to add a network manually. See
Appendix: Manual Network Setup, on page 17, for more information.
NOTE: If the JBL On Air Wireless is searching for available Wi-Fi networks
when you select Add Network, the search will immediately stop.
• name [device]: Select this option to change your JBL On Air
Wireless's default device name to one of your own choosing. The
Name screen will appear.
Use the Up, Down, Left, Right and OK buttons to select letters on the
keypad to enter the new name. Press the Center Soft (Delete) button to
backspace a character, press the Right Soft (Save) button to save the
new name or use the Left Soft (Back) button to return to the previous
menu screen without changing the device name.
system update
This menu allows you to update your JBL On Air Wireless's firmware to
the latest version.
14
(wps): If your network router is WPS-
• Internet update: Select this option to search for and download the
latest firmware from the server. If a new firmware version is available,
the JBL On Air Wireless will automatically download and install it.
During downloading and installation, the JBL On Air Wireless will
display a progress bar.
If the download and installation are successful, the progress bar will turn
green. If the download and installation fail, the progress bar will turn red,
and you will have to repeat the procedure from the System Update screen.
NOTE: The JBL On Air Wireless will automatically attempt to contact
the Internet server once a day in the evening and determine if a new
firmware version is available. If so, it will automaticaly download and
install the new firmware as described above.