Advertisement
Quick Links
JBL OnBeat
Quick Setup Guide
WeLCOme
Thank you for purchasing the JBL OnBeat
aWake iPad dock. This quick setup guide will
show you how to connect and set up your
dock. To download the free JBL Amp-Up
App and JBL Entertainment App, please go
to www.jbl.com.
COnneCtIOnS
1. Plug the JBL OnBeat aWake's power supply into the DC-In connector on the unit and
into a working AC power outlet. The JBL OnBeat aWake will automatically turn on. The
clock display screen will read "On" for 3 seconds and will then show "--:--". When you
dock your device the OnBeat aWake's clock display will synchronize with the device's
clock and will display the current time.
2. If you are going to use your JBL OnBeat aWake with another audio source, plug one
end of a 3.5mm (1/8") stereo cable (not supplied) into the JBL OnBeat aWake's Aux-In
connector, and plug the other end into the audio source's audio out or headphone out
connector.
aWake
™
FPO
PHOTO TK
™
DC-In
Aux-In
DC In
Aux In
Advertisement
Related Manuals for JBL OnBeat aWake
Summary of Contents for JBL OnBeat aWake
- Page 1 DC In Aux In 2. If you are going to use your JBL OnBeat aWake with another audio source, plug one end of a 3.5mm (1/8") stereo cable (not supplied) into the JBL OnBeat aWake’s Aux-In connector, and plug the other end into the audio source’s audio out or headphone out...
-
Page 2: Controls And Indicators
Snooze Button Snooze Button Bass ports: Place the OnBeat aWake so that the rear of its enclosure is at least 3" (76mm) away from a wall or other surface to allow the bass ports to operate properly. Docking groove and docking connector: Place your device into the OnBeat aWake’s... - Page 3 “00:00” for three seconds when the mute is on.) To restore the sound press either Volume button. Power button: When the OnBeat aWake is on, press the Power button to put it into the standby mode. (The clock display will dim in the standby mode.) When the OnBeat aWake is in standby, press the Power button to turn it on.