Table of Contents
Advertisement
MAINTENANCE
To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: Brush may
start unexpectedly.
Unplug before cleaning
or servicing.
Hand wash only with
water to prevent
damage from cleaning
chemicals. Allow
ALL filters to air-dry
completely before
replacing them in the
vacuum to prevent
liquid from being drawn
into electric parts.
IMPORTANT: DO NOT
use soap when cleaning
the filters.
EMPTYING THE DUST CUP
RECOMMENDED
1
Pull up on Dust Cup
FILTER CLEANING
Release Latch and lift dust
SCHEDULE:
cup off pod.
Pre-Motor Filter Kit
(Foam & Felt)
XFF680
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF680
Clean once a year.
17
1-800-798-7398
STEP 1
STEP 2
2 Hold dust cup over a trash
bin and press the latch
on the bottom of the dust
cup to empty it.
STEP 3
CLEANING THE FILTERS
1
Pre-Motor
3 Press the release latch on
(foam and felt):
top of dust cup to access
With the dust cup
dust screen and remove
removed, take out the
built-up debris as required.
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
FOAM FILTER
FILTER FRAME
FELT FILTER
Filter Access
HEPA
2
Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill,
press the button, and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m
18
Hide quick links:
Advertisement
Table of Contents
