Default Docsis 1.0 Tos Overwrite; Hardware Compatibility Matrix For Cisco Cbr Series Routers - Cisco cBR 8 Configuration Manual

Default DOCSIS 1.0 ToS Overwrite

This document describes the Default DOCSIS 1.0 ToS Overwrite feature for the Cisco Cable Modem
Termination System (CMTS). This feature eliminates the need to create multiple QoS profiles in order to
perform type of service (ToS) overwrite by enabling a default ToS overwrite to be bound to all DOCSIS 1.0
Cable Modem (CM) created profiles.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/. An account on
www.cisco.com/
Contents
•
•
•
•
•
•

Hardware Compatibility Matrix for Cisco cBR Series Routers

Note The hardware components introduced in a given Cisco IOS-XE Release are supported in all subsequent
releases unless otherwise specified.
is not required.
Hardware Compatibility Matrix for Cisco cBR Series Routers, page 73
Restrictions for Default DOCSIS 1.0 ToS Overwrite, page 74
Information About Default DOCSIS 1.0 ToS Overwrite, page 74
How to Configure Default DOCSIS 1.0 ToS Overwrite, page 75
Additional References, page 77
Feature Information for Default DOCSIS 1.0 ToS Overwrite, page 78
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
4
C H A P T E R
http://
16.7.x
73