Day; Disabling An Enforce-Rule; Removing Weekend Monitoring Conditions And Use The Same Monitoring Criteria Every Day - Cisco cBR 8 Configuration Manual

Subscriber Traffic Management

Removing Weekend Monitoring Conditions and Use the Same Monitoring Criteria Every Day

Use the following procedure to remove the specified weekend monitoring conditions and use the same
monitoring criteria all week (including weekends).
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5

Disabling an Enforce-Rule

Use the following procedure to disable an enforce-rule. The enforce-rule remains in the CMTS configuration
file, but any subscriber traffic management that uses this enforce-rule ends.
Command or Action
enable
Example:
Router> enable
configure terminal
Example:
Router# configure terminal
cable qos enforce-rule name
Example:
Router(config)# cable qos
enforce-rule test
no weekend
Example:
Router(enforce-rule)# no weekend
end
Example:
Router(enforce-rule)# end
Cisco cBR Series Converged Broadband Routers Quality of Services Configuration Guide for Cisco IOS XE Fuji
Disabling an Enforce-Rule
Purpose
Enables privileged EXEC mode. Enter your
password if prompted.
Enters global configuration mode.
Accesses the enforce-rule with the specified name
and enters enforce-rule configuration mode.
Performs monitoring on the weekends using the
same parameters for weekdays and weekends.
Exits enforce-rule configuration mode and returns
to privileged EXEC mode.
16.7.x
133