Connection Diagrams - Denon SC5000 Prime User Manual

Setup
1. Make sure all of your devices are powered off and all of their volume levels are at their minimum positions.
2. Connect SC5000 Prime's audio outputs (Layer A/B or Digital Outputs A/B) to the inputs of your mixer.
3. Connect any output devices (headphones, power amplifiers, loudspeakers, etc.) to the outputs of your mixer.
4. Connect all of your devices to power sources, and power them on in the proper order:
• When starting a session, power on (1) SC5000 Prime and other input sources, (2) your mixer, and then
(3) output devices.
• When ending a session, power off (1) output devices, (2) your mixer, and then (3) SC5000 Prime and
other input sources.

Connection Diagrams

Items shown but not listed under
SC5000 Prime
(rear panel)
Power outlet
SC5000 Prime
(front panel)
SD card USB flash drive
4
Introduction > Box Contents
DJ mixer
are sold separately.
Power outlet
SC5000 Prime
(front panel)
SD card
SC5000 Prime
(rear panel)
USB flash drive