Top Panel - Denon SC5000 Prime User Manual

Features

Top Panel

Media Selection & Browsing
1. Main Display: This full-color multi-touch display shows information relevant to SC5000 Prime's current operation.
Touch the display (and use the hardware controls) to control the interface. See
for more information.
2. Media Selection: These lights will illuminate to indicate if the corresponding type of media is connected: USB, SD,
or Network.
3. Source: Press this button to show a list of available devices connected to SC5000 Prime in the main display (other
networked SC5000 Prime units, USB flash drives, SD card, etc.). Tap a device in the list to select it.
4. Media Eject: Press this button to show a list of available devices connected to that SC5000 Prime unit in the main
display (i.e., USB flash drives connected to its USB ports or an SD card inserted into its SD card slot).
To eject a device, make sure none of its tracks are being played (ejecting a device unloads its tracks from all
networked SC5000 Prime units), and then tap and hold your finger on its name in the main display. A message in
the display will confirm the device was ejected after which you can remove it from SC5000 Prime.
5. Back: Press this button to move to the previous window.
6. Forward: Press this button to move to the next window.
7. Browse: While performing, turn this knob to zoom in and out of the track's waveform.
While viewing a track list, turn this knob to scroll through the list. Press the knob to select an item or load the
currently selected track to the deck.
8. View/Preferences/Utility: Press this button to switch between the library view and track view.
9. Shortcuts: Press this button to acess a short menu of playback and display options.
6
8
4
3
2
9
10
33
32
25
17
34
16
23
15
1
11
27 28 29 30 31
26
5 6
7
13
12
14
21 22
20
24
18
19
Operation > Main Display Overview