Chapter 8 Checking Connections; Turning On The Devices; Setting Up The Server To Recognize The Logical Units - Fujitsu eternus dx Configuration Manual

Chapter 8
Checking Connections
8.1

Turning on the Devices

To turn on the connected devices, use the following procedure:
1
Turn on any devices (such as LAN switches) on the LAN path between the ETERNUS DX/AF and server.
2
After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on the ETERNUS DX/AF
storage systems.
3
After checking that the ETERNUS DX/AF's Ready LED is lit, turn on the server.
8.2

Setting Up the Server to Recognize the Logical Units

Check the state of the ETERNUS DX/AF LUNs (logical units) using the "format" command.
Example: ETERNUS DX80
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
1. c6t25d0 <FUJITSU-ETERNUS_DXL-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/disk@0000iqn.2000-09.com.fujitsu%3Astorage-system.dxl%3A00001001-cm00002,0
2. c6t26d0 <FUJITSU-ETERNUS_DXL-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/disk@0000iqn.2000-09.com.fujitsu%3Astorage-system.dxl%3A00001001-cm00002,1
3. c6t27d0 <FUJITSU-ETERNUS_DXL-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/disk@0000iqn.2000-09.com.fujitsu%3Astorage-system.dxl%3A00001001-cm10004,0
4. c6t28d0 <FUJITSU-ETERNUS_DXL-0000 cyl 510 alt 2 hd 64 sec 256>
/iscsi/disk@0000iqn.2000-09.com.fujitsu%3Astorage-system.dxl%3A00001001-cm10004,1
Specify disk (enter its number): Specify disk (enter its number):
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
23
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0