Fujitsu eternus dx Configuration Manual page 7

Chapter 1 Workflow
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF.
• "Chapter 4 Checking the Server Information" (page 13)
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 14)
•
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 15)
•
Checking the setup and maintenance operations
•
"ETERNUS Web GUI User's Guide"
-
- "ETERNUSmgr Install Guide"
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS DX/AF
•
- "Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS DX/AF to be connected
Installing the iSCSI Software Initiator and Setting Up the Server
Set up the OS to connect to the ETERNUS DX/AF.
"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 16)
•
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.
• "8.2 Setting Up the Server to Recognize the Logical Units" (page 23)
Configuring the System
Set up the server as required by the system configuration.
Setting the multipaths
•
"9.1 Enabling MPxIO" (page 24)
-
• Setting a file system
"Chapter 10 Setting a File System" (page 26)
-
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
7
Copyright 2017 FUJITSU LIMITED
P3AM-4042-18ENZ0