System Valve Controller; Five-Button Controller - A.O. Smith TRIASOFT MINI User Manual

System Valve Controller

Five-Button Controller

Triasoft Mini features a five-button controller (Diagram 19) with an LCD
display. The controller can be used to view the appliance's status, perform
regenerations, and change settings.
An authorizes A.O.Smith After Sales Service should set the Service Settings
during installation of the appliance.
Controller Part
LCD Display
Normal Operating Mode
Service Settings Mode
Customer Setting Mode
Water Flowing Indicator
Soft Water Remaining
Recharge/
Regeneration Status
TR 22
Buttons
Shows the status of the controller; it is very important to know which mode the controller is in
for proper operations
Shows some or all of the following depending on settings:
• The amount of soft water remaining until the next automatic regeneration
• The number of days until the next regeneration (in Mode 1)
• The flow rate in gallons per minute
• Whether the appliance will regenerate tonight (If the REGENERATE button has been pressed
and released)
• Time of day
Includes settings such as the language, mode, water hardness, and time of each regeneration
step. Service Settings must be set before Customer Settings. Otherwise, some values may not
be available. Service Settings Mode is intended for use by qualified service personnel
Includes setting the time of day, the regeneration time, and the number of people in the
household; depending on the service settings, this option may not be available
Indicates that water is flowing through the appliance; useful for checking for proper plumbing
and leaks
Shows the gallons (or liters) of soft water remaining until the next automatic regeneration.
Typically, each person in the household uses about 75 gallons (284 L) per day.
Shows regeneration cycle numbers during regeneration. When regeneration is complete, the
display returns to the Normal Operating Mode (see above). Regeneration typically is complete
in about 30 minutes.
Function
LCD Display
WaterMizer Light