Table of Contents
Advertisement
3. DRAINING THE MACHINE
NOTE: The vacuum must be turned off prior to draining the machine.
DRAIN SPOUT:
1. Remove the cover assembly
2. Back the tank up to the drain location
3. Remove the Drain Spout Cap and
secure it in the recessed area to the
right of the spout to prevent it from
interfering with the drain area
4. Using the two-person lift method,
grab the handle at the base of the tank
and tilt backward to begin draining
the tank
5. Follow all of your company policies
and standards when lifting and moving
the machine
12/1/2017
DRAIN HOSE:
1. Back the machine up to the drain
2. Lift the drain hose from the holster
3. Remove the drain cap
4. Lay the hose into the drain
5. Replace the cap when finished
10
Advertisement
Table of Contents
