Illustration Of The Start-Point Setting - Kubota KX91-3a Workshop Manual

WSM Minor Change

3. Illustration of the start-point setting

Move the knob, and you will find the point where the thumb cylinder starts moving. Just when the
cylinder gets activated, press the selector switch. Do this for the right and left movements of the
knob.
Does control start when the start-point has been reached?
PWM current
Pilot secondary pressure signal
S/P section
Pilot secondary pressure
when the thumb cylinder
starts moving.
[mA]
II - 37
II Service Engineering Section
Voltage fluctuation signal
according to the knob's
movement
Main hydraulic line
[mA]
Input current when
the thumb cylinder
starts moving.
Knob movement [ ]