Samsung HG43NF690U Installation Manual page 28

Hotel TV Function
Category
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
Network Setup
Network
Apps ID Setting
Apps Setting
Service Discovery
ARP Interval
System
System Manager
Manager
Factory Lock
Password Popup
Password Input
Security
Password Setting
Password Reset
Security Mode
HDMI
28
English
Item
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items
are restored again to their values cloned initially.
If this item is entered into, network setup menu is displayed. The network setup menu is used
for setting network like access internet.
Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for
connection of Wi-Fi device.
y Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the
TV name in Wi-Fi connection list.
y Security key: Set a security key that you need to enter on other devices so they can connect to
the TV.
– Input the generated security key into the device you want to connect.
– If network does not operate normally,check the security key again. An incorrect
security key may cause a malfunction.
✎ Soft AP may not be available if it is not supported by the model.
✎ Maximum number of devices that can be connected: 4 devices.
✎ Bitrate : 10 Mbps/device.
✎ The specifications above are based on our in-house testing. Actual performance may vary
depending on your wired/wireless network environment.
Set SmartHub Model.
Set up SmartHub.
Can use this feature to enable Service Discovery Features like DLNA.
Adjust the ARP (Address Resolution Protocol) Interval value.
– Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 sec (default: 60 sec)
Gives you direct, immediate access to System Manager functions such as such as Time,
Language, View Notifications, Device Name.
System Manager allow you to Adjust your TV's system and customise settings for your viewing
environment.
Disable entry to Hotel menu.
y ON: The password is needed before entering factory menu.
y OFF: disable this feature.
Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password
input popup window when entering the Factory menu. If set to ON, the password input popup
window appears.
If this option is enabled, a popup input box appears which asks for an 8-character security
password. The admin must enter a password before applying or updating security preferences.
After the correct password is entered, options such as Password Setting, Password Reset and
Security Mode are available.
User can change the password.
Password is reset to "00000000".
Security Mode provides password protected administrative functionality to enable or disable
features of Hospitality TV, such as HDMI, USB and TTX. Use this option to turn security mode
on or off. After turning on security mode, options such as "USB," "HDMI" and "TTX Security" are
automatically enabled in the security sub-menu. "USB to TV cloning" and "TV Reset" will be
disabled in the Hospitality Menu.
USB Enable/disable USB access. When disabled, access to USB media is blocked.
Enable/disable HDMI access. If disabled, Anynet, HDMI source, HDMI type External Channels will
not be accessible to the user.
Description