Time Display - Bosch SHEM78WH5N Operating Instructions Manual

Tip: If you change several settings,
first make all changes in succession.
Now press the Info button 8 for
3 seconds. This saves all set values
in the appliance.
AquaSensor *
The AquaSensor is an optical
measuring device (light barrier)
which measures the turbidity of the
rinsing water.
The AquaSensor is used according
to the wash cycle. If the AquaSensor
is active, "clean" rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced
by 3–6 litres. If the turbidity
is greater, the water is drained and
is replaced with fresh water. In
the automatic wash cycles
the temperature and running time
can also be adjusted to the degree of
soiling.
* optional feature which may or may
not be included with your dishwasher

Time display

The wash cycle time is determined
during the wash cycle by the water
temperature, the amount of dishes,
as well as the degree of soiling and
may vary (depending on the selected
wash cycle). You can change the
time display into time of day or
hours/minutes so that the remaining
cycle time of the wash cycle appears
in the display window "Finish at" (for
example 15:20 o'clock) or "Finish in"
(for example 3:25 hours).
Operating the Dishwasher en-us
Sensor setting
The wash cycle sequence is
optmised in Auto wash cycles with
the aid of sensors. The sensors
adjust the wash cycle strength of
Auto wash cycles depending on the
amount and type of soiling. You can
adjust the sensitivity of the sensors in
3 stages.
Standard: This setting is ideal for a
mixed load and heavily soiled
utensils, but also saves energy and
water.
Sensitive: This setting adjusts the
wash cycle strength for the effective
removal of food remnants, even if the
amount of soiling is low. The energy
and water consumption is adjusted
accordingly.
Very sensitive: This setting adjusts
the wash cycle strength for difficult
conditions of use, for example firmly
dried on food remnants. This setting
is recommended if using biological
or eco detergents which contain
lower amounts of active agents. The
energy and water consumption is
adjusted accordingly.
extraDry
The final rinse uses a higher
temperature which improves
the drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!) You can switch the
extraDry function on or off.
Eco forecast
When Eco forecast is activated, the
average water and energy
consumption of the selected wash
cycle is briefly displayed in the digital
display @.
37