Bosch SHEM78WH5N Operating Instructions Manual page 12

en-us Getting Started
The numbers stated below refer to
the overview images on the previous
page of this manual.
Operating panel
( On/Off button
0 Wash cycles**
8 Info button
@ Digital display
H Rinse aid refill indicator
P Salt refill indicator
X Selection buttons
` Time preselection
h Remote Start button
)" Wash cycle options**
)* START button
)2 Front display *
): Open door button
)B Remote start display
)J WLAN display
)R < > button
* optional feature which may or may
not be included with your dishwasher
**number of wash cycles and options
varies on specific model number
Dishwasher interior
components
1" Interior light *
1* Third rack*
12 Upper rack
1: Upper spray arm
1B Detergent tab tray
1J Lower spray arm
1R Dispenser for special salt
1Z Filters
1b Silverware basket *
1j Lower rack
9" Rinse aid dispenser
9* Detergent dispenser
92 Lock for detergent dispenser
9: Rating plate
* optional feature which may or may
not be included with your dishwasher
10
Display indicators
‹‹:‹‹ Cycle time remaining
% Refill rinse aid indicator
Lights up when rinse aid is
low
$ Refill salt indicator
Lights up when salt is low
} Remote Start indicator
Function Remote Start is set
| WLAN indicator
Wireless network connection
is active
Info button
The Info button 8 can be used to
display additional wash cycle
information.
1. Press the Info button 8.
2. Press the wash cycle button.
Information on the selected wash
cycle is indicated on the display
window at the top @.
3. To leave, press Info button 8.
Time setting
When the appliance is switched on
for the first time, the time starts at
12:00 o'clock.
Set the time as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button 8 for
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )R until
the time setting is indicated on the
display window at the top @.
5. Make the setting with setting
buttons + - X. If the selection
buttons + - X are held down,
the set values are changed in
10-minute increments.