Bosch SHEM78WH5N Operating Instructions Manual page 14

en-us Getting Started
Settings
The dishwasher has been preset with
certain settings for your convenience.
You can change these factory
setting.
Change the setting as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button 8 for
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )R until
the required setting is displayed.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid disp.
Sensor setting
Extra dry
Eco forecast
Auto Power Off
Emotion Light *
Front display *
Remaining time
proj. *
Infolight *
* depending on the features of your dishwasher
12
Factory setting
12:00
24h
Time
American English
°E 0
Level 5
Standard
Off
Off
Off
On
On
On
On
5. Make the selection with setting
buttons + - X.
6. Press and hold the Info button
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
When you reset your
Note:
dishwasher to the factory settings,
you are taken directly to the settings
for switching on the appliance for the
first time.
Infotext
by pressing Info button (
Set the current time.
12h or 24h.
Show end of wash cycle with display "Finish in" or
"Finish at".
Language selection.
Setting water hardness. When using Multitabs, select
the lowest setting.
Amount of rinse aid affects drying. When using
Multitabs, select setting 0.
Adjustment of soiling detection for optimum cleaning
result.
Improved drying for glasses and plasticware.
Show the water and energy consumption.
Appliance automatically switches off at end of rinsing
process.
Interior light.
The front display can be selected.
While wash cycle is running, status information is
projected onto floor.
Light is projected to signal an active wash cycle.