Table of Contents
Advertisement
RFID Antenna Ports
The reader has 4 antenna ports available on 50 Ohm RP-
TNC jack connectors.
RF output (32dBm peak max.)
In order to achieve the best reading performance, the
VSWR of the antenna shall be lower than 1.5 : 1.
LEDs
The DLR-PR001-XX top cover panel houses the following
LEDs:
LED
POWER
RF ACTIVE
GSM/GPRS
FAULT
*
ANTENNA
*
The LED indicates the antenna configured via software to transmit. By
default the selected antenna is Ant1. Please note that the LED does not
indicate if an antenna is physically attached to the reader or not.
NOTE
Quick Reference Guide
Function
Power ON
RFID Transmitting activity
Not Present
Boot phase
Ready to work
Selected TX Antenna
Fault LED is on only during boot phase.
External Interfaces Description
Type
Green LED
Blink Yellow LED
No LED
Red LED
OFF
Yellow LED
11
Advertisement
Table of Contents
