Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Datalogic DLR-BT001 Series
Summary of Contents for Datalogic DLR-BT001 Series
- Page 1 DLR-BT001-XX Family RFID UHF Bluetooth® Pocket Reader EU/US Quick Reference Guide...
- Page 2 Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. DLR-BT001-XX is a trade- mark of Datalogic S.R.L. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Datalogic Group companies is under license.
-
Page 3: Table Of Contents
Set Internal Parameters .............. 11 READER-HOST COMMUNICATION SETUP CONFIGURATION ..... 12 Exemple of Communication Setup ..........13 FIRMWARE UPDATE ................13 Datalogic Limited Factory Warranty ............. 14 Warranty Coverage ................14 Warranty Claims Process ..............15 Warranty Exclusions ................15 No Assignment .................. - Page 4 DLR-BT001-XX...
-
Page 5: End User License Agreement
Datalogic Prod- ucts). License Fee License fees shall be due by End User to Datalogic according to the terms provided for in the relevant contract for the purchase of the Datalogic Product. Termination... - Page 6 Datalogic Product documentation for the period specified in the same, provided that the Software is used with the Datalogic Product. Datalogic' s entire lia- bility and End User' s sole and exclusive remedy for any breach of the foregoing limited war- ranty will be, at Datalogic' s option, the provision of a downloadable patch or replacement software.
- Page 7 Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable. If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the Datalogic Product is used and with U.S.
- Page 8 12. General Provisions 12.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to use of the Datalogic Products and the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the use of the Datalogic Products and licensing of the Software.
- Page 9 * --COPYRIGHT--,BSD * Copyright (c) 2012, Texas Instruments Incorporated * All rights reserved. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer.
-
Page 10: Software Product Policy
* --/COPYRIGHT--*/ - END - Software Product Policy Datalogic reserves the right to ship its products with the latest ver- sion of software/firmware available. This provides our customers with the very latest in Datalogic software technology. The only exception to this policy is when the buyer has a signed con-... -
Page 11: General Information
RFID Reader DLR-BT001 General Information The DLR-BT001-XX is a feature-rich hand-held UHF RFID reader. It is available in two different models to fit the different frequency standards in the EU and US regions. The reader is compliant with the standard ISO 18000-6C / EPC-C1G2 of the UHF RFID protocol. -
Page 12: General Features
General Features General Features The DLR-BT001-XX supports a Bluetooth® native keyboard emulation allowing to interact directly with legacy applications, office automation SW or any other generic solution requiring manual input. When paired to a smartphone or to a tablet, the device is a cost-effective alternative to more expensive hand-held devices. -
Page 13: Using The Dlr-Bt001
Using the DLR-BT001 Using the DLR-BT001 The DLR-BT001-XX normal behavior is to capture all the sensed identifica- tion codes associated to the reachable UHF Tags. The reader’s front panel is the user interface. Figure 1 - DLR-BT001-XX Front Panel Quick Reference Guide... -
Page 14: Front Panel Description
Using the DLR-BT001 Front Panel Description The front panel is illustrated in Figure 1, and its five main components are described in the table below: Table 2 - Front Panel LEDs and Buttons N° NAME DESCRIPTION Display LCD Alphanumeric Display (8 chars by 2 lines) Indicates the Bluetooth®... -
Page 15: Acoustic And Vibration
Using the DLR-BT001 Table 3 - Power LED Status STATUS DESCRIPTION The reader is active and the battery charge is in Green the range 35÷100% The reader is active and the battery charge is in Orange the range 15÷35% The reader is active and the battery charge is in the range 0÷15% Table 4 - Bluetooth / USB LED Status... -
Page 16: Charging The Battery
The charge will be performed using exclusively the micro USB connector (refer to "Accessories" on page 7). Any attempt to access or replace the battery will cause an infringement of the warranty. In case of battery malfunction, call Datalogic technical assis- WARNING tance. DLR-BT001-XX... -
Page 17: Accessories
Accessories Accessories A micro USB connector cable and a DC Power Supply Unit are also provided (refer to the Product Reference Guide). An additional Power Supply unit (Multi Battery Charger, Code MBC-DLRBT001 for 3 units supply), is available, too. NOTE Quick Reference Guide... -
Page 18: Technical Specifications
Technical Specifications Technical Specifications Item Description Physical Characteristics Reader Dimensions 9.9 x 5.4 x 2.0 cm3 / 3.9 x 2.1 x 0.8 in3 Length of USB Cable 1.5 m / 4.9 ft Weight 57.0 g / 2.0 oz Electrical Characteristics Battery Battery Type: Li-Ion 3.7V, 570 mAh Operating: >12 hours with 40,000 tag readings;... - Page 19 Technical Specifications Item Description Reader - Host Link Bluetooth® (wireless) Type USB (corded) Class 2 with output power 4dBm e.i.r.p. Bluetooth® Bluetooth® 2.1 - 2.4GHz USB 2.0 Full Speed (12 Mbit/s) device port Baudrate: 115.200 kbps; Virtual COM Port Databits: 8; Stopbits: 1 Parity: none;...
-
Page 20: Reader-Tag Link Profiles
Reader-Tag Link Profiles Reader-Tag Link Profiles The DLR-BT001-XX readers support different modulations and RF return link profiles according to EPC Class1 Gen2 protocol. Main profiles have been tested for the compliance with ETSI and FCC regulations (Refer to the Product Reference Guide). Radiation Patterns The DLR_BT001-XX products, due to their internally placed antenna, are field directive with a maximum sensitivity in the front/display direction. -
Page 21: Reader Reset & Internal Parameters Configuration
Getting Started READER RESET & INTERNAL PARAMETERS CON- FIGURATION Only the user interface is needed to perform the following actions. The reader needs no active host connection. Reset To reset the reader, press simultaneously the power and the trigger but- tons for about six seconds and then release them. -
Page 22: Reader-Host Communication Setup Configuration
Getting Started READER-HOST COMMUNICATION SETUP CON- FIGURATION The communication between the reader and the host varies depending • the Profile • the Operating System and the selected Host. The USB port can be also used for the communication between the reader and a the host. -
Page 23: Exemple Of Communication Setup
The DLR-BT001-XX firmware upgrade is managed only via USB by using a SW upgrade program. The upgrade tool is available for free at the Datalogic website www.datalogic.com. In order to upgrade the firmware, you must follow the steps described here below: Connect the reader to the USB port of the PC. -
Page 24: Datalogic Limited Factory Warranty
Datalogic ("Datalogic") hardware products are war- ranted against defects in material and workman-ship under normal and proper use. The liability of Datalogic under this warranty is limited to fur- nishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. -
Page 25: Warranty Claims Process
Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the ship- ment is to a location within the country in which the Datalogic service cen- ter is located. -
Page 26: No Assignment
Datalogic. DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRAN- TIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHER- WISE, INCLUDING, WITHOUT LIMITATION, ANYIMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON- INFRINGEMENT. -
Page 27: Risk Of Loss
Risk of Loss Customer shall bear risk of loss or damage for product in transit to Data- logic. Datalogic shall assume risk of loss or damage for product in Data- logic' s possession. In the absence of specific written instructions for the... - Page 28 Services and Support NOTES DLR-BT001-XX...
- Page 29 Services and Support NOTES Quick Reference Guide...
- Page 30 Services and Support NOTES DLR-BT001-XX...
- Page 32 ©2016 Datalogic S.R.L. • All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Datalogic S.R.L.. Via San Vitalino 13 Calderara di Reno (BO)|40012 ITALY Telephone:...