Connecting To The Reader Using The Serial Port; Connecting To The Reader Via Ethernet - Datalogic DLR-PR001 Series Quick Reference Manual

Getting Started
Connecting to the Reader Using the
Serial Port
You can connect to the DLR-PR001-XX using the RS232
serial port through a standard DB9 serial cable.
By default, the serial port of the reader is configured as a
configuration console; you have first to configure your
preferred serial terminal monitor (Hyperterminal, Tera
Term, Putty, etc.).
(For more details about reader connection using the serial
port, please see the Product Reference Guide).

Connecting to the Reader via Ethernet

You can connect to the DLR-PR001-XX via Ethernet
trough an Ethernet crossover cable. By default, the reader
is configured with the static IP address 192.168.0.1. If
your private network matches the default network
configuration of the reader, you can connect to it.
Otherwise, you can change the network configuration of
the reader by connecting to it with a serial communication
program (see the Product Reference Guide for more
details). Remember to select the TCP/IP connection
option and insert the IP address in the Datalogic demo
tool, or eventually in your application.
Quick Reference Guide 3