Siemens SIMATIC NET SINEMA Operating Instructions Manual page 20

Configuration
3.2 Start page
SINEMA Remote Connect user account
You obtain an overview of the user account. These include the IP address of the SINEMA
RC Server and the user name. Click the "Log out" button.
To start VPN connection establishment to the SINEMA RC server, click the "Open VPN
tunnel" button.
You terminate the VPN connection with the "Close VPN tunnel" button. If the user account is
assigned the right "Force comment", the user will be prompted to enter a comment. Only
then is the VPN connection terminated. The comment is entered in the log of the SINEMA
RC Server.
The "VPN Status" shows whether or not the VPN connection is established (online / offline).
If a VPN connection exists, the VPN address of the client is displayed
This area contains the following symbols:
●
●
20
②
Opens the WBM on the SINEMA RC Server.
Opens the autostart settings, see section "Logging in (Page 17)".
SINEMA Remote Connect - Client
Operating Instructions, 11/2017, C79000-G8976-C395-04