Advertisement
Sliding Lock Installation
1
Place template and mark holes.
1. Place template on gate and post surfaces as marked on template.
2. Mark holes and prepare them per template.
LH
2
Install armature to moving part of gate.
2a Attach armature holder to TJ bracket.
Actual Size (2x)
2b Attach armature plate to armature holder.
Armature
Plate
Armature Bolt *
Actual Size
* Armature bolt must be tightened to 120 in-lbs. Replace with bolt in Gate
kit. M490 armature must be disassembled to replace armature bolt.
Backing off the bolt after tightening will loosen the thread-
locking patch, which may allow the bolt to loosen over time.
Flat Washer
Star Locking Washer
Cone Washer
TJ Bracket
WARNING
5
Advertisement
