Lexus IS F 2012 Owner's Manual page 412

4-3. Do-it-yourself maintenance
STEP 4
Wait for a few minutes with the IGNITION ON mode, and then
STEP 5
turn the "ENGINE START STOP" switch to OFF.
412
The tire inflation pressure initial-
ization setting display
Continue to press "
the initialization setting display
appears.
It may take several minutes to com-
plete the setting. Wait for several
minutes before
"ENGINE START STOP" switch to
OFF if necessary.
Recording tire inflation pressure
settings
Press and hold the "ON/OFF" but-
ton until the tire pressure warning
light blinks slowly 3 times to indi-
cate that the initial setting is com-
plete.
 
" or " " until
turning the