3-4. Using the hands-free phone system (for mobile phones)
Using the call history memory
Follow the procedure below to use a number stored in the call history
memory:
Press the talk switch and say "Redial" (when using a number
STEP
1
stored in the outgoing call history memory) or "Call back" (when
using a number stored in the incoming call history memory).
Select the number by either of the following methods:
STEP
2
a. Say "Previous" or "Go back" until the desired number is dis-
played.
b. Select the desired number using
The following operations can be performed:
STEP
3
Dialing: Press the off-hook switch or select "Dial" using a voice com-
mand or
Storing the number in the phone book: Select "Store" and then
"Confirm" using a voice command or
Deleting: Select "Delete" and then "Confirm" using a voice command
or
,
Call waiting
■
If your phone does not support HFP Ver. 1.5, this function cannot be used.
●
Call waiting operation may differ depending on your mobile phone and service
●
provider.
Call history
■
Up to 5 numbers can be stored in each of the outgoing and incoming call history
memories.
When talking on the phone
■
Do not talk at the same time as the other party.
●
Keep the volume of the incoming voice down. Otherwise, voice echo will
●
increase.
314
,
and
and
.
,
.
,
and
.
and
.