Section 4. Specifications - Greenlee 910FS Instruction Manual

Section 4. Specifications

* Insertion loss is for cut and re-splice of identical fibers.
Greenlee / A Textron Company
Applicable Fibers
Fiber Cleaved Length
Cladding Diameter
Coating Diameter
Fiber Count
Fiber Aligning Method
Return Loss
Actual Average Splice Loss
Splicing Mode
Splicing Time
Arc Calibration Mode
Protection Sleeve Length
Storage of Splice Results
Tension Test
Fiber Display Magnification
Tube Heating Mode
Attenuator Mode
Electrode Life
Splices per Battery Charge
Tube Heating Time
Splicing/Heating Times
Display
Connectivity
Ingress Protection
Drop Test
Operating Condition
Storage Condition
Power Supply
Weight
Dimensions (HxWxT)
Splice-on Connector
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653),
NZDS/LEAF (ITU-T G.655), BIF (ITU-T G.657)
10 mm
80-150 μm
100-1000 μm
Single
Auto Core alignment
≥60 dB
0.02 dB (SM), 0.01 dB (MM),
0.04 dB (DS), 0.04 dB (NZDS, LEAF, and BIF)*
60 preset/user-definable modes
9 seconds in standard SM, 12 seconds in AUTO modes
Automatic and Manual
60 mm, 40 mm and micro sleeves
5000 results
2 N
240X
20 preset and user definable modes;
adjustable 0–240 seconds
0.1 to 15 dB
3000 splices
360
36 seconds typical
250 cycles (splice/tube heat) typical
5.7 inch color turn-over LCD
RS-232/USB 2.0
IP5X
80cm onto bottom axis
0-5000 m (0-16,400 ft) above sea level; 0 to 95% RH;
-10 to 50 °C (14 to 122 °F): Maximum wind velocity of
15 m/s
-20 to 70 °C (-4 to 158 °F); 0 to 95% RH
North America AC adapter (100-240 VAC);
Li battery (6600 mAh)
2.6 kg (5.72 lb) including battery
180x160x155 mm (7.1 x 6.3 x 6.1 in)
SC, LC, FC, and ST
38
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
910FS Splicer