Section 2. Operation; Section 2. Operation Setup - Greenlee 910FS Instruction Manual

Section 2. Operation

Setup
Installing Battery in Splicer
The 910FS can be powered by an external power adapter and battery.
Inserting the Battery
Remove the protective cover from the battery contacts. Insert the battery into the battery
compartment until it clicks into place.
Removing the Battery
Turn off the splicer. Push the release button, located on the side of the splicer body, and
remove the battery.
Two Methods of Checking Remaining Battery Capacity
Greenlee / A Textron Company
• If the battery is already installed in the splicer, turn the splicer ON. The battery is
automatically identified, and the remaining battery capacity is displayed on the
"Ready" screen.
• Press the battery check button on the battery pack. The remaining battery capacity
is indicated on the LED indicator.
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
910FS Splicer