PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual page 166

Suspensions
- Use the specific tool, fitted with part 1*, and op-
erate the handgrip until the pin and the Nadella are
simultaneously ejected in the direction opposite
the tool thrusting force.
- To eject the second Nadella, use the tool fitted
with part 2* instead of part 1, on the side opposite
the one shown in the figure.
* Supplied with the tool
Specific tooling
020021Y Front suspension service tool
-The front suspension service operation is useful to replace the connecting parts between the steering
tube and the swinging hub of the front wheel holder, provided that the steering tube and the wheel holder
hub are in excellent conditions.
Refitting
CAUTION
USE NEW ROLLER CASINGS, PIN, SEALING RINGS AND DUST GUARDS FOR REFITTING.
SUSP - 8
Vespa LX 125 - 150 4T Euro 3