Front Brake Disc - PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual

Vespa LX 125 - 150 4T Euro 3

Front brake disc

Removal
- Remove the front wheel
- Remove the front brake calliper
- Remove the hub and the disc operating on the
wheel axle nut
- Adequately support the hub with the disc and op-
erating on the five screws shown in the photo-
graph, remove the brake disc
Refitting
- Carry out the operations in the reverse order from
the removal being careful to respect the direction
of disc rotation shown by the arrow printed on it
- Tighten the 5 screws to the specified torque
Locking torques (N*m)
Brake disc screws: 6 +0.5 -1 Nm
Braking system
BRAK SYS - 5