Removing The Carburettor - PIAGGIO Vespa LX 150 4T Euro 3 Service Station Manual

Engine
- Completely empty the gas tank.
- Remove the petrol delivery tube and the suction
tube.
- Loosen the clip and remove the tap.
- Clean the tank and the filter of the tap with a spe-
cific solvent.
- Refit the tap making sure that there is an O-Ring.
- Turn the tap to the direction it had before it was
removed and block the clip.
N.B.
THE FILTER CAN BE UNSCREWED FROM THE
COCK TO FACILITATE CLEANING.

Removing the carburettor

- To detach the carburettor from the engine, it is
necessary to move the air filter and remove the
throttle control transmission, the automatic starter
connection, the clamps anchoring the carburettor
to the filter housing and to the inlet manifold, the
air delivery pipe to the diaphragm, the heater, the
intake fitting and the TPS cable.
- Remove the heater
ENG - 60
Vespa LX 125 - 150 4T Euro 3