Advanced Operation; Directory; Store A Directory Entry - VTech DS3111-2 Manual

• If a handset
attempts to enter
the directory while
another handset
is in the directory,
NOT AVAILABLE
AT THIS TIME will
be displayed.
• Press OFF/CLEAR
to exit to a previous
menu at anytime.
•

DIRECTORY

will be
EMPTY
displayed on
screen when there
is no entry in the
directory.
• When the directory
is full and you
attempt to save an
entry, the screen
will display
LIST FULL.
• If you attempt to
save a number
already stored in
the directory, the
screen will display
ALREADY SAVED.
16
DS3111-2 CIB 071607.indd 16

Advanced operation

Directory
The directory is shared by all handsets. The directory can store up to 50
entries. Each entry may consist of a number up to 32 digits and a name up
to 16 characters. Only one handset can review the directory at a time.
• Press Press from the idle mode.

Store a directory entry

Press MENU/SELECT twice when in idle mode.
1. Press
2. Press or to reach STORE, and then press MENU/SELECT.
3. The screen displays ENTER NUMBER.
4. Use the dial pad to enter the number.
• Press MUTE/REMOVE to backspace and erase digits.
Press and hold MUTE/REMOVE to erase the entire entry.
•
• Press and hold REDIAL/PAUSE to insert a three-second dialing pause.
Press MENU/SELECT to confirm.
•
5. The screen displays ENTER NAME. Use the dial pad (see the Character
chart on page 17) to enter the name.
6. Use the dial pad (see the Use the dial pad (see the Character chart on page 17) to enter the name.
Press MUTE/REMOVE to backspace and erase characters.
•
• Press and hold MUTE/REMOVE to erase the entire entry.
• Press MENU/SELECT to confirm.
www.vtechphones.com
DIRECTORY
EMPTY
>DIRECTORY
CALL LOG
>STORE
REVIEW
ENTER NUMBER
_
LIST FULL
ALREADY SAVED
7/28/2007 5:55:45 PM