Door; Filter; Door Reversal - Zanussi Series 51 New Service Manual

ACCESS FROM THE DOOR

DOOR

To accede to the door undo the screws fastening the hinge

FILTER

To replace the filter screen, without disassembling the
front panel and the duct, operate as follows:
- take out the filter screen by means of pliers as shown
in figure. Make sure that the plastic supports are not
being damaged.
- fit the new filter

DOOR REVERSAL

On some models it is possible to reverse the door
opening.
Operate as follows:
1 - Remove the door by unscrewing the two screws
fastening the hinge to the cabinet
2 - Remove the safety catch and the plug by
bending the two fastening tags by means of a
screwdriver
3 - Remove the plug with a screwdriver by bending
the two fastening tags
4 - Remove the plastic plate by unscrewing the two
fastening screws
5 - Refit the plug on place of the safety catch
6 - Refit the safety catch
7 - Refit the plastic plate on place of the hinge
8 - Refit the door and fasten the hinge to the cabinet
with the two screws.
- 13 -