Levelling; Door Reversal - Zanussi TD 524 Instruction Booklet

Tumble dryers
Hide thumbs Also See for TD 524:
Table of Contents

Advertisement

The tumble dryer must be installed in a clean place,
where dirt does not build up.
P0281
Important
When operating the tumble dryer, the room tempera-
ture must not exceed 35°C, as it may affect the perfor-
mance of the appliance.
To save energy, the room temperature should not be
lower than +15°C.

Levelling

P0046
Make sure there are no
obstructing items or
material near the air-in-
take louvres provided at
the back (e.g. paper,
rags
etc.).
Level the tumble dryer
into place by screwing or
unscrewing the front feet
as required.
Accurate levelling will
keep
vibration
and
noise to a minimum
when the dryer is in
use.

Door reversal

To make it easier to load or unload the laundry the
door can be reversed.
This operation must be carried out by qualified
personnel.
Operate as follows:
- Remove the door by unscrewing the two screws (1)
fastening the hinge to the cabinet (Fig. A).
- Remove the safety catch (2) and the plug (3) by
bending the two fastening tags (Fig. A).
- Refit the safety catch (2) and plug (3) on the door by
reversing their positions (Fig. B).
- Remove the plastic plate (4) by unscrewing the two
fastening screws (Fig. A)
- Refit the plastic plate (4) on the opposite side
(Fig. B)
- Refit the door by screwing in the two screws (1)
which fasten the door to the cabinet (Fig. B).
2
3
P0283
4
P0748
4
1
2
1
3
A
B
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Td524 al

Table of Contents