Accessibility & Serviceability; Worktop; Timer; Indicator Light - Zanussi Series 51 New Service Manual

ACCESSIBILITY & SERVICEABILITY
FROM THE WORKTOP
- Disassemble the worktop by unscrewing the two back screws and sliding it out towards the back of the
machine

1 - Timer

2 - Indicator light

3 - Door microswitch

TIMER
Remove the knob (see figure), remove the knob flange (see figure);
undo the two fastening screws. On some models remove the control
panel before removing the knob.
INDICATOR LIGHT
Widen out the conveyor's back tags and
slide out the lamp.
DOOR MICROSWITCH
Disconnect leads from the microswitch, widen fastening tags and
slide it out upwards and then inwards

CONTROL PANEL

Disengage it from the controls support interior (fastening teeth)

CONTROLS SUPPORT

Unscrew the two top screws and slide it out upwards
- 9 -