Cabinet; Drum - Zanussi Series 51 New Service Manual

CABINET

1 - Base
2 - Flexible hose
3 - Ring nut
4 - Cap
5 - Back panel cover
6 - Back panel
7 - Side panels
8 - Cross piece
9 - Duct
10 - Front panel
11 - Joint
12 - Filter
Cabinet/Side panel/Back panel/Base
Parts made of painted sheet metal fastened together by means of self-threading screws and hooked to the
base.
The base is made of Carboran material.

DRUM

1 - Front flange
2 - Central band
3 - Back flange
4 - Internal ribs
Parts 1-2-3 are seam-folded together. The tumble ribs are fastened by means of screws.
Parts making up the drum may be of sheet steel (AISI 430), of galvanised sheet-iron or may be of both zinc
and steel. The drum shaft is riveted to the back flange.
- 5 -