Fitting Seat - Safety 1st WANDERER X Manual

Assembling: Wanderer Stroller Assembling: Wanderer Stroller
TO FIT THE SEAT
•
The seat can be positioned in either the forward facing Figure 4a or
rearward facing Figure 4c configuration. Insert the seat onto the frame by
lowering the seat into the frame, as per Figure 4b.
•
Listen for 'CLICK'.
TO REMOVE THE SEAT
•
Slide and hold down button (A) with one hand and press button (B) with the
other hand, as per Figure 4d.
•
Then press button (C) and lift out the seat, as per Figure 4e.
WARNING
Do not use this seat with any other models of stroller.
4a
4c
017002 - 017003 - Wanderer X Stroller - 01 - 16
Push
Click!
4b
Press (B)
Slide (A)
Press (C)
4d
Lift
4e
Opposite side
9