Adjusting Harness Height / Tether Strap - Safety 1st WANDERER X Manual

Using: Wanderer Stroller
ADJUSTING HARNESS HEIGHT
• The harness can be set at varying heights to
accommodate the child, depending on the
model.
• To change the shoulder harness height, position
the shoulder straps near the child's shoulders
and push the shoulder
the current harness slot and through the back
of the seat. Pull the shoulder harness tongue
through the desired slot.
•
Use this harness at all times.
•
A five-point harness is provided to secure your child.
•
When not in use disconnect shoulder straps from the waist strap and
buckle.
•
The adjusted harness should closely fit the child.
TETHER STRAP
USE THIS STRAP TO STOP THE STROLLER ROLLING AWAY.
•
Correct use of the tether strap will
prevent stroller runaway
and possible injury to the stroller
occupant.
•
Whenever a child is in the stroller and
brakes are not engaged,
the large loop should be around your
wrist, as per Figure 14.
harness tongue out of
WARNING:
WARNING:
017002 - 017003 - Wanderer X Stroller - 01 - 16
14
17