Huawei iSiteC BTS3601C-800 User Manual page 47

User Manual
iSiteC BTS3601C CDMA Base Station
Including the alarms of receiver over-excited, transmit path clock out of sync.,
hardware phase-locked loop out of sync., software phase-locked loop out of sync., I
value abnormal, and digital down converter fault. Besides, the alarms related to fans,
power amplifier and MLNA are also reported through MTRB.
V. Equipment reset
BMPB and MTRB in BTS3601C can be reset.
VI. Cell resource block/unblock
BTS3601C supports the block/unblock operation over cell resources, which has the
following three priority levels:
Low priority level: To be blocked once the resource is in idle status.
l
Medium priority level: To be blocked after the specified period of delay.
l
High priority level: To be blocked immediately.
l
VII. User management
This function is used to perform authentication and user information modification for
users logged in to the BTS through Telnet.
User authentication
l
User authentication is used to realize login control and authority control over the
users logged in to the BTS through Telnet. BTS3601C supports users of the system
level and of the guest level with corresponding operation authorities.
The user name for system level user is "system", and the initial password is "system".
The user name for guest level users is "guest", and the initial password is "guest".
User information modification
l
BTS3601C supports the modification of the password by the user through Telnet.
System level users can modify the passwords for both system level users and guest
level users, while the guest level users can modify only the passwords of their own.
To modify the password, the original password should be provided.
VIII. Fault handling
BTS will take corresponding measures upon BTS resource/board faults in order to
solve or avoid the problem. The faults for BTS3601C to handle include Boot Protocol
(BOOTP) failure and Abis signaling link disconnection.
BOOTP failure
l
After the startup of BTS3610C, BOOTP (cycle: 10s) will be conducted repeatedly until
it succeeds. After starting BOOTP for 5 minutes, if BTS3601C has not finished
3-25
System Description
Chapter 3 System Function
0