Samsung SNOW-1703U User Manual page 67

Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Select Open Network Settings. The
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the
have any problems using online services, please contact your internet service
message appears.
― If the connection process fails, check the LAN port connection.
― If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Open Network Settings
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are
displayed.
Open Network Settings session starts.
"Your TV is connected to the Internet. If you
How to set up manually
1
Select Open Network
2
The network test screen appears and the verification process starts. Press Stop. The
verification process stops.
3
Select IP Settings
4
Select the field at the top, press E, and then set
the entry process for each field in the
― Setting
IP Settings
provider."
manually.
5
When done, select
screen appears and the verification process starts.
6
When the connection has been verified, the
have any problems using online services, please contact your internet service
message appears.
Settings. The Open Network Settings
on network connection screen. The IP Settings
IP Settings
IP Address.
to Enter manually automatically changes
OK at the bottom of the page, and then press E. The network test
"Your TV is connected to the Internet. If you
session starts.
screen appears.
to Enter manually. Repeat
DNS Setting to Enter
provider."
67