Commissioning - Siemens CP 1242-7 GPRS V2 Operating Instructions Manual

Preface
Purpose of the manual
This manual describes the properties of this module and supports you when installing and
commissioning the device.
The necessary configuration steps are described in the form of an overview.
You will also find instructions for operation and information about the diagnostics options of
the device.
New in this issue
Editorial revision
Replaced documentation
none
Current manual release on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Automation Customer Support under the following entry ID:
<TODO>
A link to the current manual for the version history of SIMATIC NET program blocks can be
found in the references in the Appendix of this manual.
Required experience
To install, commission and operate the CP, you require experience in the following areas:
Automation engineering
Setting up the SIMATIC S7-1200
SIMATIC STEP 7 Basic / Professional V12
Data transmission using GPRS and the Internet
Sources of information and other documentation
You will find an overview of further reading and references in the Appendix of this manual.
4
Operating Instructions, 05/2014, C79000-G8976-C311-00Fehler! Unbekannter Name für Dokument-Eigenschaft.
CP 1242-7 V2