Siemens CP 1242-7 GPRS V2 Operating Instructions Manual page 48

Configuration and programming
6.2 Information required for configuration
CP parameter for configuring the telecontrol server
The following parameters from the STEP 7 configuration of the CP 1242-7 GPRS V2 are
also required for the configuration of the telecontrol server:
Address and port of the telecontrol server
Project number
Station number
Slot of the CP
Telecontrol password
Authorized phone numbers
Connection mode (permanent/temporary)
48
Operating Instructions, 05/2014, C79000-G8976-C311-00
CP 1242-7 V2