Table of Contents
Distraction.................................................... 106
4
Getting Started
Installing the Micro-SIM Card (Included)
Power off your phone before installing or removing the micro-SIM card.
NOTE: Your phone will come with the SIM card already installed.
WARNING! To avoid damage to the phone, do not use any other kind of SIM cards, or any
non-standard micro-SIM card cut from a SIM card. You can get a standard micro-SIM card
from your service provider.
1. Insert your fingernail into the bottom left corner of the back
cover and lift it up gently.
2. Hold the micro-SIM card with the cut corner oriented as
shown and slide it into the card slot.
3. Replace the back cover.
Installing a microSDHC Card (Not Included)
The microSDHC card can be installed and removed while the phone
is turned on. Unmount the microSDHC card before removing it.
1. Insert your fingernail into the bottom left corner of the back
cover and lift it up gently.
2. Hold the microSDHC card with the cut corner oriented as
shown and slide it into the card slot.
NOTE: Your phone supports a microSDHC card up to 32 GB.
3. Replace the back cover.
Charging the Battery
Your phone's battery should have enough power for the phone to turn on, find a signal,
and make a few calls. You should fully charge the battery as soon as possible.
Do not change the built-in rechargeable battery in your phone by yourself. The battery
can only be changed by ZTE or ZTE authorized service provider.
5