Connecting To Bluetooth Devices - Zte Z899VL User Manual

Connecting to Networks and Devices
Connecting to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the
access points that supply WPS.
You can use one of the following methods to connect your phone to a wireless network
using WPS.
Method one: WPS button (Recommended)
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On
position.
3. Tap > Advanced > WPS Push Button.
4. Press the WPS button on the wireless router and the access point will recognize your
phone and add it to the network.
Method two: PIN
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On position.
3. Tap > Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the access point's setup page.
After entering the PIN, your phone automatically finds the access point and configures
the connection.
NOTE: For detailed information about the WPS feature of the access point, please refer
to its documentation.
Adjusting Advanced Wi-Fi Settings
1. Press the Home Key > > Settings > Wi-Fi.
2. Slide the switch to the On position.
3. Tap to adjust the following settings:
• Network notification: Get notifications in the Status Bar when Wi-Fi is on and an
open network is available.
32
• Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in Sleep mode.
• MAC address: Check the MAC address.
• IP address: Check the phone's IP address.
4. From the main Wi-Fi menu, tap > Advanced to adjust the following settings:
• Install certificates: Install certificates needed for connecting to certain Wi-Fi
networks.
• WPS Push Button: Connect to a WPS network via the push button method.
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.

Connecting to Bluetooth Devices

Bluetooth is a short-range wireless communication technology. Phones or other
devices with Bluetooth capabilities can exchange information wirelessly within a
distance of about 30 feet (10 meters). The Bluetooth devices must be paired before
the communication is performed.
Turning Bluetooth On/Off
1. Press the Home Key > > Settings > Bluetooth.
2. Slide the switch to the On or Off
When Bluetooth is on, the icon will appear in the Status Bar.
Changing the Device Name
1. Press the Home Key > > Settings > Bluetooth.
2. Slide the switch to the On
position if Bluetooth is off.
3. Tap > Rename this device.
4. Edit the name and tap RENAME.
Pairing With Another Bluetooth Device
1. Press the Home Key > > Settings > Bluetooth.
Connecting to Networks and Devices
position.
33