Insignia NS-TWM41WH8A User Manual page 25

NS-TWM41WH8A_17-0655_MAN_V2_EN.fm Page 25 Friday, August 4, 2017 8:10 PM
OPERATING INSTRUCTIONS
Step 5: (Optional) Set a delayed start time
You can program a wash cycle, then set a time when you want a wash cycle to begin.
1 Press the Delay button to turn on the delay start time function.
2 Press the Delay button repeatedly to select the delay time you want. The delay start time, in hours, will be
shown on the display, in sequence, from 0 to 24, then back to 0. You can also press and hold the Delay button
to quickly adjust the time until the desired time appears on the display.
3 If you want to change the wash cycle settings while you are setting the delay start time, turn the cycle selector.
To return to setting the delay start time function, repeat Steps 1 and 2.
Notes
• Once the number of delay hours is reached by pushing the Delay
button, release the button for three seconds and it will be set. The Delay
light will remain on.
• After the delay time is set, if you wish to change the delay setting, press
the Delay button again until the desired hour is reached. Release the
button for three seconds and it will be set.
• If you decide to cancel the delay setting, you can either turn the cycle
selector or push the Delay button until 0 is reached.
• Ideally, you should set your cycle before setting the Delay, because
turning the cycle selector after the Delay is set cancels the delay.
• The Delay Start Time cannot be changed after the program has
started.
4 To cancel the delay start time function before you save the setting, press the Delay button until 0 appears on
the display, or turn the cycle selector knob.
Important
You can change settings or cancel the delay start time function anytime
before you press the
The delay start time cannot be changed after you press the
button.
If you pressed the
time function by pressing the
pressing the
Step 6: Start your washer
1 Press the /Start Pause button.
Note
If you have not set a delayed start time or if the delay time has expired, your
washer starts the cycle and the Wash light turns on.
As your washer moves from stage to stage in the wash cycle, the related
light turns on (such as Rinse or Spin).
If you set a delayed start time, the Delay light turns on and your washer
starts counting down the start time.
/Start Pause button by turning the cycle selector.
/Start Pause button, you can cancel the delay start
/Power button to turn off your washer, then
/Power button again to turn it back on.
www.insigniaproducts.com
4.1 Cu. Ft. Top-Load Washer
/Start Pause
25