NS-TWM41WH8A_17-0655_MAN_V2_EN.fm Page 17 Friday, August 4, 2017 8:10 PM
INSTALLATION INSTRUCTIONS
2 Tighten the hose and faucet fittings by hand until they are snug, then tighten them an additional two-thirds of a
turn with pliers or a wrench. Pull the water supply hoses downwards to make sure that they are connected
securely.
Caution
Do not overtighten the fittings or apply tape or sealant to the
faucets or water supply intakes. This can damage the fittings.
3 Place the unconnected ends of the hoses into a bucket and turn on the faucets connected to the water supply
hoses for 10 or 15 seconds to remove any foreign substances. Turn off the faucets.
Cold
Hot
www.insigniaproducts.com
4.1 Cu. Ft. Top-Load Washer
17