Section 4 Theory Of Operation; Logic Section; Dc Distribution And Regulation Part; Logic Part - Pantech G310 Service Manual

Gsm cellular phone
Table of Contents

Advertisement

G310 Service Manual
Section 4. Theory of Operation

4.1 Logic Section

4.1.1 DC Distribution and Regulation Part

Applying battery voltage and pressing "END" key on the key pad short-circuits "Ground" and "_
PowerON". ADP3522(U103) control that power manage regarding power on/off in handset
Pressing POWERKEY on the key pad is active on the handset.
This will turn on all the LDOs, when POWERKEY is held low. The power of RF Tx power amplifier is
supplied directly by the battery.

4.1.2 Logic part

4.1.2.1 Summary

The logic part consists of AD6526 ARM7 microprocessor-combined GSM-ASIC, COMBO(flash
ROM & SRAM), AD6521 VBC Chip. AD6526 is GSM-ASIC chipset implemented for GSM terminal's
system control and baseband digital signal processing.
Major parts used in the logic part are as follows:
1) AD6526 : U101, [ARM7 Processor Core + GSM Signal Processing] ASIC
2) AD6521 : U102, Voiceband Baseband Codec
3) COMBO MEMORY(Flash ROM : U104, 128Mbit Flash Memory + 32Mbit SRAM )

4.1.2.2 Baseband Digital Signal Processing

AD6526 is a GSM core device containing ARM7 CPU core. AD6526 is 160 pin LFBGA (mini-BGA)
package, consisting of terminal chips. The function and characteristics of clock are as follows:
1) Complete single chip GSM Processor
2) Channel codec sub-system
Channel coder and decoder
Interleaver and Deinterleaver
Encryption and Decryption
3) Control Processor Subsystem including
Parallel and serial Display interface
Keypad Interface
SIM Interface
Control of RADIO subsystem
Real Time Clock with Alarm
8
PANTECH
R&D CONFIDENTIAL

Advertisement

Table of Contents
loading

Table of Contents