Section 1 Introduction; Introduction; Frequency Allocation And Its Use - Pantech G310 Service Manual

G310 Service Manual
SECTION 1. Introduction
1.1 An Introduction of GSM Digital Cellular Mobile Communication System
GSM (Global System for Mobile communication) concluded that digital technology working in
the Time Division Multiple Access (TDMA) mode would provide the optimum solution for the
future system. Specifically , a TDMA system has the following advantage
► Offers a possibility of channel splitting and advanced speech coding ,resulting in improved
spectrum efficiency.
► Offers much greater variety of service than the analog
► Allows considerable improvements to be made with regards to the protection of information.
The GSM system is basically designed as a combination of three major subsystem;
The network subsystem, the radio subsystem, and the operation support system.
The functional architecture of a GSM system can be divided into the Mobile Station (MS), the Base
Station (BS), and the Network Subsystem (NS). The MS is carried by the subscriber, the BS
subsystem controls the radio link with the MS and the NS performs the switching of calls between
the mobile and other fixed or mobile network users as well as mobility management. The MS and
the BS subsystem communicate across the Um interface also known as radio link
The specifications relating to MS are as follows:
TS 100 607-1 : Digital cellular telecommunication system(Phase2+)Mobile Station (MS) con
Formance specification Part1:Conformance specification

1.2 Frequency Allocation and Its Use

Transmit frequency band : 880 MHz ~ 915 MHz(For EGSM) , 1850 MHz ~ 1910 MHz(For PCS)
Receive frequency band: 925 MHz ~ 960 MHz(For EGSM) , 1930 MHz ~ 1990 MHz(For PCS)
Channel spacing : 200 KHz
ARFCN(Absolute Radio Frequency Channel Number) : 1~124 and 975~1023 (For EGSM),
512~810 (For PCS)
Transmit・receive frequency spacing: 45 MHz(For EGSM), 80MHz(For PCS)
Frequency band and Channel Arrangement
For standard GSM
MHz MHz
890 ~915
MHz MHz
935 ~960
For Extended GSM Fl(n)=890+0.2*n
MHz MHz
880 ~915
MHz MHz
925 ~960
For PCS Band
MHz MHz
1850 ~1910
MHz MHz
1930 ~1990
** Fl(n)= frequency value of the carrier , Fu(n)= corresponding frequency value in upper band
Fl(n)=890+0.2*n 1 ≤n≤ 124
: Mobile Transmit,Base receive
: Base Transmit, Mobile receive
1 ≤n≤ 124
Fl(n)=890+0.2*(n-1024)
: Mobile Transmit,Base receive
: Base Transmit, Mobile receive
Fl(n)=1850.2+0.2*(n-512)
: Mobile Transmit,Base receive
: Base Transmit, Mobile receive
PANTECH
Fu(n)=Fl(n)+45
Fu(n)=Fl(n)+45
975 ≤n≤ 1023
512 ≤n≤810 Fu(n)=Fl(n)+80
3
R&D CONFIDENTIAL