Power Indicated Led & Status Led - Pantech G310 Service Manual

G310 Service Manual
6.1.5 Power indicated LED & Status LED
During Stand By Mode
Status LED Should be flashing during Stand By (Blue).
1. Check to see if Q202.2 pin voltage is around 2.8V : CP115
NO Replace the Transistors.
During Incoming Call Mode.
Status LED should be blinking during Incoming Call (all colors: Green, Red, Blue).
1. Check to see if Q201 and Q202 are well operated. : CP115, CP116
NO Replace the Transistors.
34
PANTECH
CP115
CP116
CP115
CP116
R&D CONFIDENTIAL