Epson Home Cinema LS-100 User Manual page 69
Hide thumbs
Also See for Home Cinema LS-100:
- Quick setup (4 pages) ,
- User manual (209 pages) ,
- User manual
Table of Contents
Advertisement
4. Select the Notifications menu and press Enter.
5. Turn on the SNMP setting.
6. Enter up to two IP addresses to receive SNMP notifications as the Trap IP Address setting, using 0
to 255 for each address field.
Note: To enter the IP address using the numeric keys on the remote control, press and hold the
Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
69
Advertisement
Table of Contents
