Digital China Networks DCRS-7604 Installation Manual page 29

DCRS-7600 InstallManual
1.4.2.6.2 Front Panel - Indicator
The following table describes the front panel indicators for the MRS-7600-1-10GX
and MRS-7600-2-10GX:
Table 1-13 Description of the MRS-7600-1-10GX 、MRS-7600-2-10GX indicators
LED Panel
Indicator Symbol
Power
PWR
Indicator
Operation
RUN
indicator
XENPAK port indicator
Status
Link
indicator:
Transmissio
Act
n Indicator
1.4.2.6.3 Front Panel Port Description
MRS-7600-1-10GX 、 MRS-7600-2-10GX provides 1 or 2 XENPAK 10Gb fiber
transceiver slots;
Port Type
XENPAK
1.4.2.6.4 Front Panel – Reset Button
The MRS-7600-1-10GX 、MRS-7600-2-10GX provides a RESET button for resetting
the board.
Fig 1-13 MRS-7600-2-10GX front panel view
Status
On (green)
Off
On (Green, blinks at 1 Hz)
On (Green, blinks at 8 Hz)
On (Yellow, blinks at 8 Hz)
On (Red, blinks at 8 Hz)
Off
On (Green)
Off
Blinking (Green)
Table 1-14 XENPAK port descriptions
XENPAK-SC transceiver (10GBASE-LR LAN-PHY)
(Agilent HFCT-701XB, LAN mode, wavelength 1310nm)：
62.5/125 µm multi-mode fiber (MMF): 300m
9/125 µm single-mode fiber (SMF): 10Km
1-24
Chapter 1 Product Overview
Card powered.
Card powered off
Card operating normally
System is loading
System is shutting down
Malfunction status
Card is powered off and can be
removed.
Network
XENPAK transceiver is normal
No network connection present
on XENPAK transceiver
Sending or receiving data
Specification
Description
connection on