Table of Contents
Advertisement
DCRS-7600 InstallManual
SFP-LX-40-L
SFP-LH-70-L
SFP-LH-120-L
SFP-GT
1.4.2.2.4 Front Panel – Console Port
The MRS-7604-M4GX24TX provides a RJ-45 (receptacle) Console serial port. Users
can connect to hosts via this port to perform system debugging, configuration,
maintenance, management and host software loading.
Table 1-5 MRS-7604-M4GX24TX Console description
Property
Connector
Connector type
Baud rate
Supporting service
1.4.2.2.5 Front Panel – Management Port
The MRS-7604-M4GX24TX provides a RJ-45 (receptacle) Ethernet port. Users can
connect through this management port to hosts for program loading or to connect to
remote devices for remote management (e.g., a managing workstation). Note: when
connecting to the host, a cross-over cable should be used.
Table1-6 MRS-7604-M4GX24TX management port description
Property
Connector
Connector type
1.4.2.2.6 Front Panel – Reset Button
MRS-7604-M4GX24TX provides a RESET button for resetting the board.
1.4.2.3 MRS-7608-MI
The MRS-7608-MI is switching module for the DCRS-7608. System status control,
switch management, user access control and management, and network maintenances
are performed here. The board can be inserted into M1 or M2 slots of the chassis for
Gigabit SFP SM 1310 nm, 40Km (LHX)
Gigabit SFP SM 1550 nm, 70Km (ZX)
Gigabit SFP SM 1550 nm, 120Km (ZX)
Gigabit SFP to Copper cable RJ45
RJ-45 (receptacle)
RS-232
9600bps (default)
Connects to character terminals
Connects to PC serial port and running terminal emulator
on PC.
RJ-45 (Receptacle)
10/100Mbps auto sensing
Cat 5 UTP: 300 m
1-18
Chapter 1 Product Overview
Specification
Specification
Advertisement
Table of Contents
